Fan Accessories
A PC lives or dies on the basis of its cooling system, and fans are often the foundation of that. We offer silicone fan mounts and gaskets, fan speed controllers, dust filters, isolation washers and cables to make sure you’re getting the best from your fans.
Type
- Accessory(1)
- Anti-Vibration Fan Mount(19)
- Cable(13)
- Dust Filter(4)
- Fan Controller(5)
- Fan Gasket(4)
- Fan Grille(8)
Brand
- Acousti(8)
- Gelid(13)
- Noctua(33)
Cable type
- Fan extension 3-pin(2)
- Fan resistor 3-pin(2)
- Fan resistor 3/4-pin(1)
- Fan splitter 3-pin(1)
- Fan splitter 3/4-pin(4)
- Molex to 3-pin fan(1)
- SATA to 4-Pin fan(1)
- VGA to 4-pin fan(1)
Size
- 80 mm(3)
- 92 mm(1)
- 120 mm(6)
- 140 mm(4)
- 200 mm(2)
Length
- 70 mm(1)
- 110 mm(3)
- 115 mm(2)
- 125 mm(2)
- 300 mm(3)
- 350 mm(1)
- 420 mm(1)
Acousti OEM-AFG120B 32 Black Anti-vibration 120mm Fan Gaskets
- Bulk pack of 32 gaskets for OEM / system builders
- Help to absorb the fan vibration
- Help to ‘seal’ the small gap between the fan and the casing/enclosure wall
- Compatible with virtually all case cooling fans
- Supplied with screws and silicone washers
- Quick and very easy to fit
Acousti AFM03B OEM Ultra-Soft Easy-Fit Fan Mounts qty 100 (25 fans)
- Extra-soft black silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
Gelid Solutions AMBER8 Pro Bundle, 5x Stella Infinity 120mm ARG Fans and Controller
- Supplied with 5x Stella Infinity ARGB fans and AMBER8 controller
- Controls up to 8 fans, 10 LED strips
- 366 Pre-Programmed RGB Modes
- 21-key RF Remote Control Unit
Acousti AFM02B OEM Ultra-Soft Flush-Fit Fan Mounts qty 100 (25 fans)
- Extra-soft black silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
Noctua NA-FH1 8 Channel PWM Fan Hub
- Compatible with 4-pin PWM and 3-pin fans
- CE, UKCA and UL safety certifications
- RPM and status monitoring
- Protects against overcurrent with a self-resetting fuse
- 6-year manufacturer’s warranty
Noctua NA-FG1-20 Sx5 200mm Fan Grille, 5 pcs
- Offer excellent protection and reliably
- Available in sets of 2 (Sx2) and 5 (Sx5)
- Tool-free push-pin mounting
- Offset mounting for extra quietness and better performance
- Elegant, matte-black design
Noctua NA-FC1 PWM Fan Controller
- Flexible 4-pin PWM fan controller
- Compatible with all 12V and 5V Noctua fans
- PWM duty cycle from 0 to 100%
- Supports up to three PWM fans
Noctua NA-FG1-14 Sx5 140mm Fan Grille, 5 pcs
- Offer excellent protection and reliably
- Available in sets of 2 (Sx2) and 5 (Sx5)
- Tool-free push-pin mounting
- Offset mounting for extra quietness and better performance
- Elegant, matte-black design
Noctua NA-FG1-12 SX5 120mm Fan Grille, 5 pcs
- Offer excellent protection and reliably
- Available in sets of 2 (Sx2) and 5 (Sx5)
- Tool-free push-pin mounting
- Offset mounting for extra quietness and better performance
- Elegant, matte-black design
Noctua NA-FG1-20 Sx2 200mm Fan Grille, 2 pcs
- Offer excellent protection and reliably
- Available in sets of 2 (Sx2) and 5 (Sx5)
- Tool-free push-pin mounting
- Offset mounting for extra quietness and better performance
- Elegant, matte-black design
Noctua NA-FG1-8 Sx5 80mm Fan Grille, 5 pcs
- Offer excellent protection and reliably
- Available in sets of 2 (Sx2) and 5 (Sx5)
- Tool-free push-pin mounting
- Offset mounting for extra quietness and better performance
- Elegant, matte-black design
Gelid Solutions Amber 8 Pro Save 17%
- 10 Addressable RGB Channels
- 8 PWM Channels (5 controllable)
- 366 Pre-Programmed RGB Mode
- Manual/ Auto RGB Controls
- 21-key RF Remote Control Unit
- ARGB Sync Compatible
Noctua NA-FG1-14 Sx2 140mm Fan Grille, 2 pcs
- Offer excellent protection and reliably
- Available in sets of 2 (Sx2) and 5 (Sx5)
- Tool-free push-pin mounting
- Offset mounting for extra quietness and better performance
- Elegant, matte-black design
Noctua NA-FG1-12 Sx2 120mm Fan Grille, 2 pcs
- Offer excellent protection and reliably
- Available in sets of 2 (Sx2) and 5 (Sx5)
- Tool-free push-pin mounting
- Offset mounting for extra quietness and better performance
- Elegant, matte-black design
Gelid Solutions PCI Slot Fan Holder with two slim 120mm UV Blue Fans
- Two slim 120mm UV blue fans
- High airflow with quiet operation
- Two slot design with air intake holes and dust filter
- Bundled with fan Y-Cable connector
Noctua NA-FG1-8 Sx2 80mm Fan Grille, 2 pcs
- Offer excellent protection and reliably
- Available in sets of 2 (Sx2) and 5 (Sx5)
- Tool-free push-pin mounting
- Offset mounting for extra quietness and better performance
- Elegant, matte-black design
Gelid Solutions AMBER5-RF 5-Channel RF Remote ARGB Controller
- 5 Addressable RGB Channels
- 5 PWM Channels (Shared PWM Control)
- 366 Pre-Programmed RGB Modes
- Manual/Auto RGB Controls
- 21-key RF Remote Control Unit
- ARGB Sync Compatible
- Built-in Magnet Holder
Noctua NA-SAV2 chromax.white Anti-Vibration Fan Mounts, 20 pack
- Set of 20 Anti-vibration mounts for five fans
- Design for most fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SAV2 chromax.red Anti-Vibration Fan Mounts, 20 pack
- Set of 20 Anti-vibration mounts for five fans
- Design for most fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SAV2 chromax.green Anti-Vibration Fan Mounts, 20 pack
- Set of 20 Anti-vibration mounts for five fans
- Design for most fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SAV2 chromax.blue Anti-Vibration Fan Mounts, 20 pack
- Set of 20 Anti-vibration mounts for five fans
- Design for most fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SAV2 chromax.black Anti-Vibration Fan Mounts, 20 pack
- Set of 20 Anti-vibration mounts for five fans
- Design for most fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SAC1 4-Pin Molex to 3-pin Fan Adaptor Cables, 3 pack
- Power 3-pin a fans from 4-pin molex connectors
- 120mm cable length
- Contains three adapters
Noctua NA-SAV2 chromax.yellow Anti-Vibration Fan Mounts, 20 pack
- Set of 20 Anti-vibration mounts for five fans
- Design for most fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SAV3 Anti-Vibration Fan Mounts, 16 pack
- Reduces fan vibrations
- Compatible with different fan thickness
- Includes 16 mounts for four fans
- Simple to install
Noctua NA-SAV4 Anti-Vibration Fan Mounts, 16 pack
- Reduces fan vibrations
- Compatible with different fan thickness
- Includes 16 mounts for four fans
- Simple to install
Noctua NA-SAV2 Anti-Vibration Fan Mounts, 20 pack
- Reduces fan vibrations
- Includes 20 mounts for five fans
- Simple to install
Noctua NA-SAC5 S-ATA to 4-pin Power Adaptor Cable
- S-ATA to 4-pin adaptor
- Simple to install
- Provides an extra 4-pin fan header
Noctua NA-SAVP1 chromax.green Anti-vibration pads
- Set of 16 Anti-vibration pads for four fans
- Design for most Noctua fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SAVP1 chromax.blue Anti-vibration pads
- Set of 16 Anti-vibration pads for four fans
- Design for most Noctua fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SAVP1 chromax.red Anti-vibration pads
- Set of 16 Anti-vibration pads for four fans
- Design for most Noctua fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SAVP1 chromax.white Anti-vibration pads
- Set of 16 Anti-vibration pads for four fans
- Design for most Noctua fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SAVP1 chromax.yellow Anti-vibration pads
- Set of 16 Anti-vibration pads for four fans
- Design for most Noctua fans
- Extra-soft silicone
- Available in six different colours
Noctua NA-SEC1 4-Pin PWM Fan Extension Cables, 3 pack
- 300mm extension for PWNM fans
- Braided cable
- Supplied in a pack of 3
Noctua NA-SEC2 3-Pin Fan Extension Cables, 3 pack
- 300mm extension for standard 3-pin fans
- Braided cable
- Supplied in a pack of 3
Noctua NA-SRC10 3-Pin Low-Noise Adaptors, 3 pack
- Reduces the speed of 3-pin fans by approx. 30%
- Fully sleeved
- Supplied in a pack of 3
Noctua NA-SRC7 4-Pin PWM Low-Noise Adaptors, 3 pack
- Reduces the speed of 4-pin PWM fans by approx. 30%
- Fully sleeved
- Supplied in a pack of 3
Noctua NA-SYC1 4-Pin PWM Fan Y-Cables, 2 pack
- Allows for two PWM fans to be connected to one power source
- Fully sleeved
- Supplied in a pack of 2
Noctua NA-SYC2 3-Pin Fan Y-Cables, 2 pack
- Allows for two 3-pin fans to be connected to one power source
- Fully sleeved
- Supplied in a pack of 2
Noctua NA-SAVP1 chromax.black Anti-vibration pads
- Set of 16 Anti-vibration pads for four fans
- Design for most Noctua fans
- Extra-soft silicone
- Available in six different colours
Acousti AFG120B Anti-vibration 120mm Fan Gasket
- Help to absorb the fan vibration
- Help to ‘seal’ the small gap between the fan and the casing/enclosure wall
- Compatible with virtually all case cooling fans
- Supplied with screws and silicone washers
- Quick and very easy to fit
Acousti AFG92B Anti-vibration 92mm Fan Gasket
- Help to absorb the fan vibration
- Help to ‘seal’ the small gap between the fan and the casing/enclosure wall
- Compatible with virtually all case cooling fans
- Supplied with screws and silicone washers
- Quick and very easy to fit
Acousti AFG80B Anti-vibration 80mm Fan Gasket
- Help to absorb the fan vibration
- Help to ‘seal’ the small gap between the fan and the casing/enclosure wall
- Compatible with virtually all case cooling fans
- Supplied with screws and silicone washers
- Quick and very easy to fit
Gelid Solutions 1-to-4 PWM Fan Hub Cable
- Simple cable that allows four fans to be connected to one header
- Adhesive backed for out of the wat installation
- Works with 3-pin and 4-pin PWM fans
Acousti AFM02B Ultra-Soft Flush-Fit Fan Mounts, qty 8 (2 fans)
- Extra-soft black silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
Gelid Solutions 1-to-4 PWM Fan Splitter
- Connect four PWM fans from one PWM fan header
- Molex connector for extra power
- Easy installation
Acousti AFM03B Ultra-Soft Easy-Fit Fan Mounts, qty 8 (2 fans)
- Extra-soft black silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
Gelid Solutions Mesh Magnet 140 Fan Dust Filter for 120mm fans, 3pcs
- Removable magnetic frame
- Fine PVC mesh 17 pores per inch
- Excellent airflow pass
- Fast and easy application
- Durable, washable and reusable
- Three dust filters per pack
Gelid Solutions Mesh Magnet 120 Fan Dust Filter for 120mm fans, 3pcs
- Removable magnetic frame
- Fine PVC mesh 17 pores per inch
- Excellent airflow pass
- Fast and easy application
- Durable, washable and reusable
- Three dust filters per pack
Gelid Solutions Mesh 140 Fan Dust Filter for 140mm fans, 3pcs
- Ultra Fine PVC Mesh 27 with pores per inch
- Excellent airflow pass through
- Lightweight and easy to install
- Washable and reusable
- Three filters per pack
Gelid Solutions Mesh 120 Fan Dust Filter for 120mm fans, 3pcs
- Ultra Fine PVC Mesh 27 with pores per inch
- Excellent airflow pass through
- Lightweight and easy to install
- Washable and reusable
- Three filters per pack
Gelid Solutions PWM Y Cable, Connect two PWM fans to one socket
- Allows for two PWM fans to be controlled from one PWM socket
- Can be daisy changed together, to control up to five fans
- Cable length 350mm
- PWM fans increase cooling depending on CPU temp
Gelid Solutions PWM Adaptor Cable for VGA Cooler Fans
- Allows use of a PWM fan powered by the graphics card
- Fan speed will increase and decrease depending on GPU temperature
- Use it with our PWM Y Cable for multiple PWM fans
Gelid Solutions 3-pin Fan Resistor Cable
- Cheap simple way of quietening fans
- Reduces fan speed by around 50%
- Premium black sleeve cable
- Compatible with 3-pin fans
Recently Viewed Products
Quiet PC Serenity Ultimate Gamer D5 i17
Quiet PC Kyanite v2 Z4 mATX Gaming PC
Streacom ST-DB4 Titanium Fanless Aluminium Bi-Symmetrical ITX Chassis
Gelid GP Ultimate 1pc 2.0mm 90x50 Thermal Pad
AMD Ryzen 5 5600G 3.9GHz 6C/12T 65W AM4 APU with Radeon Graphics 7
Quiet PC DB1i Fanless i17
(Discontinued)
Intel NUC 12 Pro Kit NUC12WSKi7, Core i7, 12C/16T, 2.2-4.7GHz, M.2 only
(Discontinued)
Noctua NM-i17xx-MP78 78mm pitch LGA1700 Kit
AMD Ryzen 7 7700X 4.5GHz 8C/16T 105W 32MB Cache AM5 CPU
Quiet PC AMD AM5 CPU and DDR5 ATX Motherboard Bundle